It’s Essential To maintain A Tractor Cooling System

Believe it or not, it becomes necessary to maintain a tractor cooling system to ensure its safety and life expectancy! With the rising temperature, the engine starts heating up and can cause major damage to the vehicle. To eliminate these instances only, cooling systems are installed in vehicles. A cooling system controls the engine’s temperature and keeps it balanced. In large vehicles, like agriculture equipment, cooling systems play a part. That is why it is advised that you must maintain the cooling system of vehicles regularly. You should not skip services for a long time; in fact, make a monthly servicing schedule and plan accordingly!

Components of tractor cooling system

Very similar to other combustion engine cooling systems, a tractor’s cooling system consists of the following components:

Coolant: A coolant can be a pure coolant as well as a blend of coolant and water. Coolant is basically a conditioner that offers protection against corrosion of the cooling system in warmer climates.

Radiator: These are located in the front of the tractor to get the maximum out of the airflow to help keep the coolant’s temperature low.

Thermostat: Helps to maintain the temperature at the desired point. By sensing its temperature variation in a device or system, a thermostat regulates accordingly.

Water pump: Most of the tractors have a pump inside a cooling system to pump water or coolant through the engine.

Hose: Hoses are responsible for directing coolant to the radiator and engine.

Fan: Located in front of the radiator, the fan supports airflow and cooling in the absence of outside air.

A cooling system plays an essential role in maintaining the optimum temperature of engines of automobiles. Have you ever experienced car or tractor overheating? That is when a cooling system starts working and calms down the hot engine. 

Maintain the cooling system!

A cooling system in automobiles plays a significant part in stabilizing the temperature of the engine. Mostly, the cooling system is the one that fails more often out of other mechanical systems. And that happens just because we decline the fact that it needs good service after a while.

Would you like to stand in the middle of the fields, fixing issues inside a tractor on a fine sunny day? Prevention is better than cure! Hence, it is essential to go for servicing a tractor cooling system before using it!

Check Coolant: quality and quantity

Every vehicle works appropriately if a specific amount of coolant is in it, especially in summers. For proper functioning of the vehicle, make sure you have maintained an appropriate level of coolant. Coolant’s amount (quantity) plays a vital role; it should be neither too low nor too high! Where quantity comes, it is understandable quality too will come! So make sure you are using a suitable quality of coolant in the cooling system.

Sometimes we mix water coolant; make sure you add the correct amount of water to it. Always remember to use just water straight in the coolant, it is not a good idea! You can consult experts or read manuals. 

Conclusion

Along with the point mentioned above, do check whether hoses are correctly connected to ensure safety. Do not forget to check that the fans and water pumps are also working correctly! If you observe any issues in the parts of the cooling system, you can get them quickly.

Not only this, you can get other tractor parts like fuel filters online! AgSpares avail you with manuals, spare parts, maintenance, and agriculture equipment. Ensure your cultivation at maximum efficiency with AgSpares!